InSb芯片碎裂与迸溅金点的关系

批量生产中经常发生的锑化铟(InSb)芯片碎裂问题制约着InSb红外焦平面探测器(IRFPAs)成品率的提升.经分析认为:低周期液氮冲击下发生在器件边沿区域的InSb芯片破碎与该区域中迸溅金点的存在有关.为从理论上明晰迸溅金点对InSb芯片局部碎裂的影响,本文建立了包含迸溅金点的InSb IRFPAs结构模型,分析了迸溅金点的存在对应力分布的影响.在此基础上,在应力集中处预置不同长度的初始裂纹用以描述InSb晶片中的位错,以能量释放率为判据,探究InSb芯片碎裂与迸溅金点和位错线长短的关系.结论如下:1)迸溅金点的存在对InSb芯片碎裂的影响是局部的,在迸溅金点与InSb芯片接触区域的两侧会形成两个应力集中点; 2)环绕预置裂纹的能量释放率会随着预置裂纹长度的增加而加速增大,当预置裂纹长度接近InSb芯片上表面时,能量释放率近乎指数增加,并在预置裂纹贯穿InSb芯片时达到最大值; 3)迸溅金点引起的InSb芯片破碎属于Ⅰ型断裂失效模式,在多周期液氮冲击中,位错线在应力集中效应的驱使下逐步扩展,直至贯穿InSb芯片,最终形成宏观碎裂失效现象.     

Calculation of the anharmonic effect on the main reactions referring to ethylbenzene combustion mechanism

About 11 reactions related to ethylbenzene are studied in this paper using transition state theory. The YL method proposed by Yao and Lin is utilized to calculate the anharmonic and the harmonic rate constants in these reaction processes in the temperature range of 300–4,000 K, energy diagram and the temperature dependence of the rate coefficients are also presented. The calculations indicate that the harmonic rate constants are larger than the anharmonic rate constants in most cases. Especially, there is a temperature junction between the high and low relationship between the anharmonic and harmonic rate constants in several reactions. Furthermore, the calculated values are in good agreement with other theoretical ones within the allowable error. Finally, the kinetic parameters and the thermodynamic parameters are calculated. To sum up, it can be concluded that the anharmonic effect in these reactions is very significant and cannot be ignored.     

Cobalt ferrite for direct cracking of methane to produce hydrogen and carbon nanostructure: Effect of temperature and methane flow rate

Cobalt ferrite (CoFe₂O₄) was used as a catalyst for direct methane cracking. The reaction was accomplished in a fixed bed reactor at normal atmospheric pressure, while gas flow rate (20–50 mL/min) and reaction temperature (800–900 °C) were varied. The fresh CoFe₂O₄ morphology is sponge-like particle with inverse spinel structure as revealed from SEM and XRD results. The methane conversions and hydrogen formation rate were increased with reaction temperature, while catalyst stability and induction period decreased. Increases of gas flow rate > 20 mL/min led to a decrease the overall catalytic activity of CoFe₂O₄ for methane cracking. The XRD results of spent catalysts revealed that CoFe alloy was the active phase of methane cracking. TGA analysis showed that the largest amount of deposited carbon was 70.46 % at (20 mL/min, 900 °C), where it was 34.40 % at (50 mL/min, 800 °C). The deposited carbon has the shape of spherical carbon nanostructures and/or nano sprouts as observed with SEM. Raman data confirmed the graphitization type of the deposited carbon.     

Heterogeneous/homogeneous and inclined magnetic aspect of infinite shear rate viscosity model of Carreau fluid with nanoscale heat transport

The study of the inclined flow along with the heterogeneous/homogeneous reactions in the fluid has been widely used in many industrial and engineering applications, such as petrochemical, pharmaceutical, materials science, heat exchanger design, fluid flow through porous media, etc. The purpose of this study is to present an infinite shear rate viscosity model using the inclined Carreau fluid with nanoscale heat transport. The model considers the effect of inclined angle on the fluid’s viscosity and the transfer of heat at the nanoscale. The result shows that the viscosity of the fluid decreases by increasing the inclination angle and the coefficient of heat transfer also increases with the inclination. The model can be used to predict the viscosity and heat transfer fluid’s behavior in the inclined systems that is widely used in the industrial and engineering applications. The results provide a better understanding of the inclined flow behavior of fluids and the heat transfer at the nanoscale, which can be useful in heat exchanger design, fluid flow through porous media, etc. Greater Infinite shear rate viscosity parameter gives the higher magnitude of Carreau fluid velocity. Moreover, inclined magnetic field reduces the velocity due to Lorentz force. Two numerical schemes are used to solve the model, BVP4C and Shooting.     

具有连续参数齐次随机场的线性预测(Ⅲ)

提出和研究了一般的斜半平面及角状区域上的具有连续参数齐次随机场的线性预测问题,且推广了文[1]的结果.     

基于比率的三种群混合扩散模型的动力学行为

讨论了一类基于比率的非自治三种群混合扩散模型,三种群间既有捕食关系又有竞争关系.我们研究了该模型的动力学行为:包括一致持久性,全局渐近稳定性,周期解,概周期解的存在唯一性.表明即使食饵种群在某些孤立的斑块中可能绝灭,也可以通过适当选取扩散率来保证系统持续生存.     

大颗粒磷钼酸铵:制备与结晶动力学(英文)

通过缓慢滴加焦磷酸钾的硝酸溶液到钼酸铵溶液中制得了大颗粒磷钼酸铵(AMP)。研究了AMP的成核速率(G)与晶体生长速率。与晶体生长速率相比成核速率的反应级数更高。最初,大颗粒磷钼酸铵的结晶过程处于相变反应控制的动力学区域,此时溶液的过饱和生成速率比过饱和消除速率高。晶体线生长速率与溶液的过饱和度先增加后降低。在滴加中期,过饱和消除速率增长到与其生成速率相当。在滴加后期,晶体成核速率快速增高,而晶体的线生长速率下降。晶体的成核速率成为过饱和消除的唯一控制步骤。因此,AMP成核大部分是在首先接触到滴加液的局部溶液中完成的。     

环烷酸对油水界面膜流变性质的影响研究

研究了环烷酸对油水界面膜界面张力、弹性模量、损耗模量以及界面膜破裂速率常数的影响,同时对环烷酸与沥青质之间的相互作用进行了测定。结果表明,环烷酸使得原油油水界面张力下降;弹性模量随着环烷酸加量以及振荡频率的增加都分别逐渐增大,并且最终都趋于平衡;在任何振荡频率值时,损耗模量都随着环烷酸加量先增大后减小;当环烷酸加量增加时,界面膜破裂速率常数降低。环烷酸与沥青质之间存在相互作用,随着环烷酸加量的增加,其对沥青质界面膜弹性模量的影响与对原油界面膜弹性模量的影响相似,表明环烷酸主要是通过与沥青质相互作用而促进乳状液稳定性的。     

α-四(对磺酸钠苯氧基)酞菁锌(钴,镍)光敏剂的光动力性质研究

采用UV-Vis光谱、红外吸收光谱、CHN元素分析及激光解析飞行时间质谱对α-四(对磺酸钠苯氧基)酞菁锌(钴,镍)[α-PhSPcZn(Co,Ni)]进行表征.在光诱导条件下,采用四甲基偶氮唑蓝比色法(MTT法),考察了光敏剂的中心原子、浓度和光照时间等条件下对癌细胞的抑制作用.结果显示,光照15min、浓度为0~100mg·L-1范围内时,α-PhSPcZn的抑瘤率高于α-PhSPcCo和α-PhSPcNi.抑瘤率均随光照时间和配合物浓度的增加而升高,α-PhSPcZn的抑制率可达54%,其IC50值为75mg·L-1.     

1,3-双[3-(1-甲氧基-2-羟基丙氧基)丙基]封端聚硅氧烷的合成

以1,3-双[3-(1-甲氧基-2-羟基丙氧基)丙基]四甲基二硅氧烷和八甲基环四硅氧烷(D4)为原料,通过阳离子催化开环聚合制备了1,3-双(3-(1-甲氧基-2-羟基丙氧基)丙基)封端聚硅氧烷,研究了反应温度,反应时间,催化剂种类及加入量对于聚合反应的影响,结果表明,最佳反应条件为:反应温度65℃,反应时间24h,浓硫酸作为催化剂加入量为反应物质量的0.3%,此时反应拥有最高的转化率。通过红外光谱与核磁共振光谱对产物进行了表征。